Arrangement
Inclined roof and vertical glazing

BESPOKE ROOF-TO-WALL GLAZING
A continuous glazed link across the roof and vertical elevation, designed to draw daylight deep into extensions and connect old and new architecture.
AT A GLANCE
Inclined roof and vertical glazing
Welded aluminium eaves system
Project-specific steel or aluminium
Double glazed with heat-treated laminated inner
Structural glass-to-glass silicone
Powder coated to selected RAL
CLEAR DETAILS. EASY CHOICES.
Product information, installation
and documents in one place.
An eaves rooflight combines inclined or horizontal overhead glazing with a vertical glazed face. The junction is designed as one composition so the eye follows the glass from roof to wall.
We coordinate the frame geometry, glass-to-glass joints, supporting steel and internal concealment around the building rather than forcing the project into a standard size.
Final framing, support and thermal strategy depend on span, pitch, room use and surrounding construction.
A separate opening window can be integrated into the vertical face where ventilation is required. Any escape function needs its own approved clear opening and safe route.
Solar-control glass can reduce overheating where larger glazed areas face strong sun.
Steel RHS, back-to-back angles or other supports are selected around span and architectural intent.
Panel divisions can be coordinated so roof and vertical joints read as a single composition.
This specialist system is supplied with installation by Overhead Glazing. We coordinate the approved detail, delivery, lifting and fitting; the quotation states the included work.
We review plans, sections, pitch, wall height, opening requirements and intended internal finish.
Where geometry is irregular, site measurements or rigid templates can establish the true opening.
Detailed drawings confirm glass lines, framing, supports and interfaces before production.
Frames and supporting elements may be installed first, followed by glazing and final seals.
The roof structure, prepared upstand, waterproofing, lifting and access responsibilities are agreed with your project team before work begins.
YOUR PROJECT PRICE
Based on the glass, dimensions and agreed service.
LEAD TIME
Programme confirmed after specification and drawing review.
BEFORE MANUFACTURE
Ask us to check the opening and installation dimensions.
OUR SPECIALIST TEAM
Fitting, access and lifting requirements agreed with your project team.
Final cost and programme are confirmed for your specification and agreed scope.
ROOF-TO-WALL GLAZING
Compare how the glass is divided, then see how each design looks on a real installation.
One roof pane · one vertical pane
A fixed up-and-over design for a single opening. An uninterrupted pane on each face keeps the view clear.

Multiple panes along the roof
Divide a longer roof section into smaller panes while retaining a single vertical pane where the opening allows.


Multiple bays across both faces
Repeat the roof-to-wall glazing across a wider opening. Glass joints and support are designed around the span and loads.


THE DETAIL, FROM EVERY ANGLE
Select a photograph
to look closer.







OVERHEAD GLAZING IN MOTION

THE DETAIL MAKES THE DIFFERENCE
Welded corners and carefully aligned glazing create a deliberate architectural transition between roof and wall.

PERFORMANCE WITH CONTEXT
Glass, frame, support and intended use are considered together.
Depending on span and geometry, the system can be coordinated with steel RHS, angles or a discreet internal support.
Frame positions and insulation continuity are developed together. Concealment behind finishes does not itself make a non-thermally-broken section thermally broken.
Final framing, support and thermal strategy depend on span, pitch, room use and surrounding construction.
BEFORE YOU CHOOSE
It is a glazed assembly that continues from the roof plane into a vertical glazed elevation, creating a roof-to-wall glass link.
Yes. A separate opening casement can be coordinated within the vertical face, subject to the opening design. It is not automatically an escape window; that duty requires separate project approval.
The specification depends on the system and geometry. Some specialist eaves sections are not thermally broken. The thermal bridge, insulation continuity and condensation risk must be assessed for the actual junction; concealment alone is not thermal insulation.
Support is project-specific and may include steel RHS, angles or other engineered members located to preserve the intended sightlines.
Yes. Larger eaves rooflights can use multiple panes with structural silicone joints, with divisions aligned across the roof and vertical faces.
Yes. We are London based and undertake bespoke roof-glazing projects across the UK, subject to access and programme review.
This specialist product is supplied with installation by Overhead Glazing only. Supply-only is available for suitable fixed flat rooflights.
Qualifying insulating glass units carry a 10-year seal warranty, subject to the written terms supplied with the order. This is not a blanket guarantee against breakage or a 10-year frame or installation warranty. Installation labour carried out by us is covered for five years, subject to the written terms.
CUSTOMER FEEDBACK
Read feedback about Overhead Glazing on Google.
Share your postcode, drawings and project details. We’ll help confirm a suitable specification.
We’ll use these details to respond to your enquiry. Privacy policy
Your enquiry goes straight to our team.
PROJECTS & PRACTICAL ADVICE

The overhead glass continues into a tall vertical pane, bringing sky light into the room and framing the view across the surrounding hill.