Frame
Thermally broken aluminium

ROOFLIGHTS FOR WALL JUNCTIONS
Our bespoke fixed wall abutted rooflights fit against walls on up to three sides, bringing daylight deeper into your extension.
CLEAR DETAILS. EASY CHOICES.
Product information, installation
and documents in one place.
Wall-abutted rooflights are ideal where an extension roof meets the rear or side wall of an existing building. The wall interface is designed differently from a standard four-sided rooflight so water can be managed without a bulky external pressure plate.
We coordinate the rooflight frame, upstand, wall abutment and surrounding flashings before manufacture, helping the builder create a clear and buildable junction.
The wall junction, roof fall and flashings must be coordinated with the builder’s waterproofing system before manufacture and installation.
A fixed rooflight can be adapted where one long or short side meets the building wall.
Larger wall-abutted openings can use multiple panes with structural silicone joints between glass units.
A project-specific cill or wall pressing can help throw water clear and complete the external junction.
Glass coatings can be selected for exposed extensions, kitchens and large open-plan living spaces.
This specialist system is supplied with installation by Overhead Glazing. We coordinate the approved detail, delivery, lifting and fitting; the quotation states the included work.
We review the plan, section, roof fall, wall construction and the proposed waterproofing approach.
Kerb sizes, wall chase, cill and flashing zones are agreed before the opening is completed.
The wall-abutted frame and glass are produced only after the project detail is approved.
The unit is fixed to the prepared upstand and the wall interface is completed with the agreed weathering detail.
The roof structure, prepared upstand, waterproofing, lifting and access responsibilities are agreed with your project team before work begins.
YOUR PROJECT PRICE
Based on the glass, dimensions and agreed service.
LEAD TIME
Programme confirmed after specification and drawing review.
BEFORE MANUFACTURE
Ask us to check the opening and installation dimensions.
OUR SPECIALIST TEAM
Fitting, access and lifting requirements agreed with your project team.
Final cost and programme are confirmed for your specification and agreed scope.
THE DETAIL, FROM EVERY ANGLE
Select a photograph
to look closer.




OVERHEAD GLAZING IN MOTION

THE DETAIL MAKES THE DIFFERENCE
The wall side can be detailed without an external pressure plate, keeping the glazing line visually simple. Thermal bridging is assessed through the complete frame and wall junction.

PERFORMANCE WITH CONTEXT
Glass, frame, support and intended use are considered together.
The roof fall, upstand, wall chase and aluminium cill or pressing are coordinated to direct water away from the junction.
The rooflight uses the same thermally broken aluminium approach as our standard fixed rooflights, adapted for the wall abutment.
The wall junction, roof fall and flashings must be coordinated with the builder’s waterproofing system before manufacture and installation.
BEFORE YOU CHOOSE
It is a rooflight designed so one side meets an adjacent building wall rather than sitting on a freestanding four-sided upstand.
Our wall-abutment approach can avoid a conventional external pressure plate at the wall, reducing visible metal. Thermal performance still depends on the frame, edge and surrounding construction.
This is agreed project by project. The builder or roofer normally coordinates the primary waterproofing, while we provide the required rooflight interface information.
Yes. Larger openings can use several panes with weather-sealed structural silicone joints.
A positive fall should be formed to shed water. The exact pitch and drainage direction are confirmed with the roof and abutment details.
Double and triple-glazed options can be considered depending on size, weight, thermal targets and the supporting construction.
This specialist product is supplied with installation by Overhead Glazing only. Supply-only is available for suitable fixed flat rooflights.
Qualifying insulating glass units carry a 10-year seal warranty, subject to the written terms supplied with the order. This is not a blanket guarantee against breakage or a 10-year frame or installation warranty. Installation labour carried out by us is covered for five years, subject to the written terms.
CUSTOMER FEEDBACK
Read feedback about Overhead Glazing on Google.
Share your postcode, drawings and project details. We’ll help confirm a suitable specification.
We’ll use these details to respond to your enquiry. Privacy policy
Your enquiry goes straight to our team.
PROJECTS & PRACTICAL ADVICE

The rooflight meets the wall cleanly while the perimeter frame, falls and waterproofing interfaces remain coordinated.